To compare an interactive display with a projector for a meeting room, add up everything the room will cost to run for five years, not just the price of the hardware. That means installation and making good, electricity, consumables such as lamps and filters, the support time spent fixing problems before meetings, repairs and spare parts, software and licences, and what happens to the old equipment at the end. The cheaper option is the one with the lower total for that particular room and the way it is used.
There is no single answer, because rooms differ. A huddle room used all day and a boardroom used twice a week produce very different totals. The checklist below sets out each cost factor so you can price both options on the same basis.
1. Start with the room, not the product
Measure the distance from the screen to the farthest seat, note how much daylight the room gets and decide what the room is for: presenting, video calls, or people writing and annotating together. A projector needs a clear throw path, a screen or suitable wall and, in a bright room, blinds or a brighter and more expensive model. A display needs a wall that can take the weight or a floor stand, and a size large enough to be read from the back of the room. If either option forces building work such as new blinds, a reinforced wall or relocated sockets, that cost belongs in the five year total.
2. Installation and making good
Ask each supplier to price the full installation: mount, cabling, power and network points, removal of the old kit and making good. Projector installs often involve ceiling work and long cable runs to the table, while displays are usually wall mounted at the front of the room. Ask for these as separate lines so you can compare like with like.
3. Power use and automatic power down
Running cost depends on how many hours the equipment is actually on. Electronic displays sold in Great Britain must meet the ecodesign requirements in Schedule 19 of the Ecodesign for Energy-Related Products and Energy Information Regulations 2021. These set power limits for off mode and standby, and require displays other than televisions to power down when no input is detected. For digital interactive whiteboards the limit is over 60 minutes with no input, while for most other displays it is over 10 seconds. It is still worth checking that power settings were not changed during setup.
To estimate electricity cost, multiply the on mode power from the product information sheet by realistic hours of use per year and by your own tariff, then do the same for the projector. Business electricity prices vary widely between contracts, so use your own rate.
4. Consumables and routine maintenance
Many projectors need replacement lamps and filter servicing at set intervals, while laser projectors and flat panel displays generally avoid lamp changes. Ask for the rated life of the light source and the filter service interval, then work out how many replacements fall within five years at your hours of use, including the time to do the work.
5. Support time and failed meetings
The hidden cost in most meeting rooms is time: meetings that start late because the laptop will not connect or the remote has gone missing. Count how often this happens now. A setup where people walk in and share wirelessly, or with one cable, usually generates fewer support calls than one that relies on adapters and a projector remote.
6. Software, licences and updates
Interactive displays often include whiteboarding, screen sharing or device management software. Check which features are included for the life of the panel and which need a subscription after a trial period. For displays covered by the GB ecodesign rules, manufacturers must make firmware and security updates available for at least eight years after the last unit of the model is placed on the market. Ask how long the specific model will be supported, because an unsupported device on your network becomes a security problem.
7. Repairs and spare parts
The same regulations require manufacturers of electronic displays to make certain spare parts, such as the internal power supply, connectors and certain capacitors, available to professional repairers for at least seven years after the last unit of a model is placed on the market. The external power supply and the remote control must also be available to end users for the same period. Check the warranty length, whether it is on site or return to base, and who pays for a replacement while a unit is away.
8. Disposal of the old equipment
The old projector and screen are waste electrical and electronic equipment. Environment Agency guidance explains that producers are responsible for financing the treatment of non household equipment they placed on the market on or after 13 August 2005, and for older equipment that a business is replacing with equivalent new equipment, unless the producer and the business have agreed something different. Ask your supplier how the old kit will be collected, and keep the waste transfer paperwork.
How to put the comparison together
- List the room size, viewing distance, light levels and hours of use.
- Get itemised quotes for both options, including installation and removal.
- Estimate five years of electricity from the product information sheets and your tariff.
- Add consumables, servicing and subscriptions at your hours of use.
- Add an allowance for support time based on your current call volume.
- Check warranty terms, parts availability and the supported update period.
- Confirm who collects and recycles the old equipment, and at what cost.
How Apex helps
We survey meeting rooms, recommend the right size and type of screen for each one and give itemised quotes so the comparison is transparent. See our interactive displays service, or our hardware procurement service if you are replacing equipment across several rooms or sites. We work nationwide and remotely, with on site installation in London, Liverpool, Manchester, Greater Manchester and Cheshire.